Elite’s automated assembly process meters grease in three separate inputs. Extra capacity in the bearing cavity keeps a supply of lubricant close to the tapered bearing.
As grease warms and expands during operation, the compensator disc moves outward and compresses the wave spring. When the roller stops and the grease contracts, the spring presses on the disc to help keep the grease in contact with the bearing and prevent voids.
Greased for life. Elite meters grease during automated assembly in three separate inputs. Extra capacity in the bearing cavity helps keep lubricant at the bearing.
Grease moves because of the taper of the rolling elements.
Grease expands as the bearing warms during operation.
The compensator disc moves outward and compresses the wave spring.
As the roller stops and the grease contracts, the wave spring presses lightly on the disc to help prevent voids.
Elite Steel Can Roller idler ratings
The following CEMA ratings apply to Elite Steel Can Roller welded-end-cap idlers used on above-ground and underground conveyors.
CEMA ratings for above-ground and underground welded-end-cap idlers
Specification
CEMA C
CEMA D
CEMA E
L10 bearing life
30,000 hours
60,000 hours
60,000 hours
Listed load rating
Up to 900 lb
Up to 1,200 lb
Up to 1,200 lb
Belt width
18–60 in.
24–72 in.
36–96 in.
What L10 bearing life means
L10 is the calculated operating life that 90% of a group of comparable bearings are expected to reach or exceed under the specified conditions. Actual service life depends on load, speed, contamination, and installation. Confirm the rating for your roller size and application with Elite.